Skip to main content

Posts

Raspberry Pi GIT Server Notes

Edit: I updated my RP GIT server and made more notes in a later article. Here are my notes for setting up GIT on Raspberry Pi and using a Windows client (TortoiseGit). I’ve been using this little thing as a GIT server for around 5 months now and I love it. Here is the quick notes I took while getting things setup. It’s probably really disjointed, but you might find some helpful tips in here. www.raspberrypi.org http://www.raspberrypi.org/downloads NOOBS (offline and network install) http://downloads.raspberrypi.org/NOOBS_latest Format your SD card using the SD Card Association’s formatting tool. https://www.sdcard.org/downloads/formatter_4/ Install Raspbian (GIT seemed to be pre-installed on the version I used): The defaults: username: pi password: raspberry When greeted with the post install program, find the advanced option to enable SSH. You can also change your password from there. 2017 Edit: I’m in the process of installing it on a larger SD card. Anything over 32GB will probably ...

FXAA Shader Anti-aliasing in XNA 4.0 Winforms

I had the challenge of trying to get some type of anti-aliasing in a project that uses the winforms method of XNA 4 that was being run on a laptop in REACH mode. My first step was figuring out a method to use. I found quite a few shader based methods available, but I could get none of them to work. FXAA written by a engineer at NVIDIA seemed like the best option, so I went with that. I wrote up a question on Stack Overflow to see if anyone could help. Eventually with enough research and …playing around… with the code I have it functioning. Here is an example to help anyone who might be interested in doing the same thing. —————————————————- I’m using this example project’s XNA 4.0 form control in an application I’m writing: http://creators.xna.com/en-US/sample/winforms_series1 If you are unfamiliar with FXAA, check out the creator’s site: http://timothylottes.blogspot.com/2011/03/nvidia-fxaa.html I’ve spent quite a bit of time so far trying to figure out to use it without any luck...

XNA 4.0 Red X Exceptions

So I’m developing a windows application that uses XNA 4.0 embedded in a custom windows control. The main issue I have is when the code inside that embedded control errors out, the windows form and control result in a big red X across the control instead of stopping and going to the debugger so I can find out where the issue is. I’m using Visual Studio 2010 Express since my copy of VS2008 doesn’t work with XNA 4.0 (why do that to us Microsoft?). Anyways… Information about running XNA in a windows form: http://creators.xna.com/en-US/sample/winforms_series1 http://creators.xna.com/en-US/sample/winforms_series2 On your keyboard do the key-press combination of: CTRL-ALT-E That opens up the “Exceptions” window. The odd thing is I can’t find the menu item for that window. In the Exceptions window I have two main checkboxes, but the important one for this issue is: “Common Language Runtime Exceptions” Check the box for “thrown” so we can receive internal exceptions. Now instead of getting ...

Fixing Wordpress Database Collation for Foreign Fonts

I wanted to write Japanese in one of my wordpress blogs. The issue was that the encoding was in latin1. Here are the steps I used below. Keep in mind that this is a potentially dangerous modification where you could easily lose your data. Be careful and if you try this, you do it at your own risk! Make a complete backup of your site by whatever methods you normally use. Also make a backup of your wordpress site’s database. Login into CPanel and select phpMyAdmin. Click the SQL tab around the top of the page on the right panel. This is where you can execute SQL code. ALTER DATABASE dbname DEFAULT CHARACTER SET utf8 COLLATE utf8_general_ci; (where dbname is the name of your database) That line fixes the existing database by changing the default encoding. In my case I had a latin1 variant. That step above is to avoid completely dropping and re-creating the database. Login into CPanel again and download a copy of the database using the backup wizard. This consists of a tar.gz (zip...

First Android Application Released: River Water Level Stations

Update: I gifted this code and basically the entire project with related software tools I had made to my friend who I was trying to start a business with after we decided to stop. The app is still active and available on the market under his account and not “CWSolver” anymore. A friend and I just finished our first Application targeted for the Android marketplace. The application basically allows the user to monitor the level of rivers in the United States thanks to publicly available data that is updated frequently. This is useful to anyone who does boating among other various activities that have some relation to rivers. Here is the link to Water Level Stations on the Android market. Here is our official description: “Do you fish and hunt? Are you out on the river frequently for business or pleasure? It is important to know what the level and flow of the river is, so you can stay safe and maximize your enjoyment. We have an application tailor made for you.Water Level Stations allow...

A little rant about Android SDK, Java, and Eclipse

I don’t often rant nor say the work “sucks” very often. However as any programmer knows, some tools just frustrate you to no end. Java, the Android SDK, and the Eclipse IDE are something I need to use, but are frequently on my “sucky tools” list. I’ve used a lot of programming languages and tools in my day, and these have made the frustrating Sh** king-of-the-mountain where things like Cobol and JCL reside. Here is an email rant I made recently: Wasted the whole day trying to get the settings activity working as I initially designed it. I eventually dropped that after wasting a large amount of time “playing” around with the code, so now the unit conversions happen outside of the settings activity. In the settings activity, it is just cut-and-dry select setting and select type of units. There is no unit conversion and re-selection of a setting value in the spinner as I had attempted to do earlier. For example, 10 for the search distance will me km or miles depending on if the use...

Android SDK: String Arrays and Controls like Spinners

Due to how the Android SDK and Java are setup it isn’t really a simple task to link up an array with a spinner control. I’ll go over some basics I just learned of the process. In this example I setup a setting control that will allow the user to select from a list of values. The spinner control will be initialized by the global setting value (from a black box object in this example), and a control listener will be defined that allows the user to change the global setting. To define a list of string values that can be loaded into android controls you would do something like this. You can add an arrays.xml file to your project (in the /res/values directory): <?xml version="1.0" encoding="utf-8"?> <resources> <string-array name="settinglist01"> <item>1</item> <item>2</item> <item>3</item> <item>4</item> <item>5</item> </string-a...

Android Eclipse Issue: Unparsed aapt error Unknown Android Packaging Problem

I added my first menu to an Android application through Right-click on the project in New >> Other… >> (Android) >> XML file. After editing the file I tried running it and received this error: Unparsed aapt error(s)! Check the console for output. PROJECT_NAME Unknown Android Packaging Problem A google search brought up a few results which helped. All you need to do is access the Eclipse IDE menu item: Project >> Clean… You can then clean all projects open or just the one having an issue. Seems like and file.xml.out gets generated or something causing a packing issue to occur. The clean process fixes that. A strange error that isn’t easy to diagnose without having knowledge about the IDE and Android Plug-in for sure…

Setting up Subversion (SVN) on Ubuntu Linux

After getting the Android SDK and Eclipse IDE installed and running, I started on getting Subversion ready for our first project. Here are the general steps necessary. For my configuration there is a Ubuntu server that I connect through ssh and will need to do the same to connect to SVN after everything is configured. Useful tutorials: https://help.ubuntu.com/community/Subversion https://help.ubuntu.com/community/AddUsersHowto https://help.ubuntu.com/community/AptGet/Howto Commands executed to setup the system: sudo apt-get install subversion cd / mkdir svn_repository sudo addgroup subversion sudo adduser USERNAME1 subversion sudo adduser USERNAME2 subversion # Repeat the above line for other usernames as needed sudo adduser www-data subversion cd /svn_repository mkdir android_test sudo svnadmin create /svn_repository/android_test cd /svn_repository sudo chown -R www-data:subversion android_test sudo chmod -R g+rws android_test Above I have an example where a directory called “svn_re...

Setting up the Android SDK in Linux (Eclipse IDE)

While it’s generally pretty “easy” to setup the Android SDK in Linux (in my case Ubuntu 10.04), there are a few quirks that required some searching on the Internet to figure out. The SDK and related items are located here: http://developer.android.com/sdk/index.html Here is the general process I went through to get things running: – Install JDK by typing “jdk” into the ubuntu software center and install the proper piece of software. I think you need at least version 5 or 6 for the Android SDK. – Install eclipse by getting the latest version at http://www.eclipse.org/downloads/ – Download “Eclipse IDE for Java Developers” – Extract eclipse-java-helios-SR1-linux-gtk-x86_64.tar.gz (or similar depending on what version you download) to say the… /home/user/ directory (you can run the program by double clicking on the “eclipse” icon in the main directory of the program. – I started the program and defin...